Pacific YurtsManufacturer Representative
|
Last Activity: 04-22-2024 06:20 PM
- User Lists
About Me
- About Pacific Yurts
- Biography
- The original manufacturer of modern lattice wall yurts.
- Location
- Cottage Grove, Oregon
Friends
Showing Friends 1 to 1 of 1
-
- Surely Yurts - Steve
- Manufacturer Representative
Likes Received
108 Likes
-
Marshall Eppley liked post by Pacific Yurts On thread : Roll on or paint on roof sealant for many small holes?I've had quite a few customers do this to extend the life of the cover so that they can save enough money to purchase a new one. Typically they get at least a couple of extra years out of it.Liked On: 10-04-2013, 01:30 PM
Posted On: 10-03-2013, 01:50 PMJafo liked post by Pacific Yurts On thread : Roll on or paint on roof sealant for many small holes?The top cover can be painted with an elastomeric paint. This can be found at your local paint or home improvement store and will seal up the fabric and give you additional life from it. It is...Liked On: 10-03-2013, 10:33 AM
Posted On: 10-03-2013, 10:31 AMDan R-M liked post by Pacific Yurts On thread : Finishing a Weathered PlatformDan, I would remove the drip edge from your platform and rent a large walk-behind sander. This will make the job of sanding the old platform much easier. After it is sanded and the dust removed...Liked On: 09-25-2013, 09:08 PM
Posted On: 09-25-2013, 11:07 AMJafo liked post by Pacific Yurts On thread : Finishing a Weathered PlatformDan, I would remove the drip edge from your platform and rent a large walk-behind sander. This will make the job of sanding the old platform much easier. After it is sanded and the dust removed...Liked On: 09-25-2013, 04:00 PM
Posted On: 09-25-2013, 11:07 AMMarshall Eppley liked post by Pacific Yurts On thread : Yurt CanvasIf the top cover fabric is strong and pliable you should be able to shift it by disconnecting the side cover from it and then blow air between the top cover and insulation using a leaf blower. This...Liked On: 09-05-2013, 05:59 PM
Posted On: 08-26-2013, 11:25 AMDan R-M liked post by Pacific Yurts On thread : Yurt CanvasIf the top cover fabric is strong and pliable you should be able to shift it by disconnecting the side cover from it and then blow air between the top cover and insulation using a leaf blower. This...Liked On: 09-04-2013, 07:42 PM
Posted On: 08-26-2013, 11:25 AMJafo liked post by Pacific Yurts On thread : Yurt CanvasIf the top cover fabric is strong and pliable you should be able to shift it by disconnecting the side cover from it and then blow air between the top cover and insulation using a leaf blower. This...Liked On: 08-26-2013, 04:28 PM
Posted On: 08-26-2013, 11:25 AMmanyhorses liked post by Pacific Yurts On thread : Yurt FlooringMemmons, I would recommend building a raised ring around the outer circumference of the yurt platform using 1x6 laid flat and glued to the sub floor. This ring can be stained/finished prior to...Liked On: 08-04-2013, 10:08 PM
Posted On: 07-23-2013, 01:19 PMMarshall Eppley liked post by Pacific Yurts On thread : Yurt FlooringMemmons, I would recommend building a raised ring around the outer circumference of the yurt platform using 1x6 laid flat and glued to the sub floor. This ring can be stained/finished prior to...Liked On: 08-04-2013, 07:12 AM
Posted On: 07-23-2013, 01:19 PMHawaiiYurts liked post by Pacific Yurts On thread : earthen floorAn adobe or cob yurt platform can be built in much the same way as a concrete platform. If you incorporate a ring of treated wood or Trex type of material that is anchored into the raised platform...Liked On: 06-14-2013, 07:36 PM
Posted On: 06-11-2013, 10:48 AMMarshall Eppley liked post by Pacific Yurts On thread : Wind and the YurtHi Dan, Although the yurt is an aerodynamic shape it is best to plan for the "worst case" at your site. Based on what you've said I would recommend adding the Snow & Wind Kit. Simply think of it...Liked On: 05-21-2013, 05:38 PM
Posted On: 05-21-2013, 11:58 AMamberoons liked post by Pacific Yurts On thread : 30' Yurt with loft, does anyone have one??Some photos and ideas for lofts that may be helpful can be found on our blog site here: June « 2012 « Pacific Yurts' Blog (http://blog.yurts.com/?m=201206).Liked On: 03-26-2013, 01:01 PM
Posted On: 03-26-2013, 12:45 PMJafo liked post by Pacific Yurts On thread : Pacific Yurts Big Year End Sale: 12/31/12 (W/Sup/L)Thanks Jeff! The parts sale is under way already and also ends on 12/31/12. It is valid on replacement parts valued at $300 or more.Liked On: 12-20-2012, 07:41 PM
Posted On: 12-20-2012, 07:39 PMJafo liked post by Pacific Yurts On thread : 24-27-30? and who I should have on my listOne of the entries on our blog (www.blog.yurts.com) is all about interior lofts and includes photos and ideas for planning. Jeff is right about about not being able to change the size of the yurt...Liked On: 11-26-2012, 02:39 PM
Posted On: 11-26-2012, 12:43 PMJafo liked post by Pacific Yurts On thread : Enclosing the platform?Karl, you could also try HardieBacker. James Hardie Backerboard | Residential Siding from James Hardie (http://www.jameshardie.com/homeowner/products-interior.shtml) It bends readily, can be...Liked On: 11-16-2012, 03:09 PM
Posted On: 11-16-2012, 12:24 PM