Planning to build a yurt in Czech Republic

[Knecht]

Finishing the ring. Meanwhile, here's couple pics from yesterday's and today's progress.

Making template for the stovepipe hole shape. Guess it can be calculated somehow, but in my case, the tape technology was much faster


Metal shield cut and attached. I got these large sheets of thin steel very cheaply in my favourite off-sale hardware. No idea what were they ment for, they are painted white on one side and grey on the other. Too bad they are just a little smaller than I needed, so I had to make it from two parts. At least it made cutting the pipe hole easier. I used solid copper rivets for strong, non-corroding connection.


The shield was sprayed black and one of the transparent panels attached. I put a bead of silicone between the layers. Mind my homemade washers under the nails