Help With Waterproofing My Yurt Crown??

[Bob Rowlands]

Well thanks for the compliment but I'm no roofer. I'd run a hose up there and go section by section looking for obvious leaks. Looking at your photos I would silicone every last seam and also the exposed inside edge of the flashing where it sits on the ring, plus the tops of the screws attaching flshing to the ring. Ideally that flashing would be sandwiched between the upper assembly and the ring, would be canted to the outside, and have a lip on the inside facing up. But that's just a guess I'm no roofer. Good luck.