How to fit wooden floor to the lattice wall

[jona]

I would like to use used scaffolding wood as floorboards which comes on the plywood platform sheets.

The problem is how am I going to fit that with the crossed wall slats. I can make a half round recess there and let the rest of the shelf come against the dripedge.

I would like your advice on this.

 

[Bob Rowlands]

The easiest procedure is to erect your yurt on top of the finished floor.

The 'used scaffold boards' I'm familiar with seeing on dang near every house I've ever worked on over the last five decades, have zero business being used for finish flooring. They are thrown in the dumpster.

But, I'm not looking at your boards. If you have good ones, hike up the wall and slide them under the lattice, and cut in place. Good luck.