Ad
Prev
Wood roof poles, metal pins, and a metal roof ring. It had a tendency to spiral down and in on itself. The roof is precariously balanced on three pol
Next
Prev
024 Trimming the plywood.
022 Framing the deck.
After a few modifications! I welded five sockets onto the ring and slid the roof poles in. After adding most of the remaining poles and tightening t
Wood roof poles, metal pins, and a metal roof ring. It had a tendency to spiral down and in on itself. The roof is precariously balanced on three pol
I made a jig to drill the ends of my roof poles and cut 46 metal pins to fit.
This is my roof ring. I have since welded four braces or spokes into the center.
My door frame in the rough.
Next
dennishl

Wood roof poles, metal pins, and a metal roof ring. It had a tendency to spiral down and in on itself. The roof is precariously balanced on three pol

  • Media owner dennishl
  • Date added
There are no comments to display.

Media information

Album
My 16' Home Scratch Build Yurt
Added by
dennishl
Date added
View count
6
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top